File information: | |
File name: | r_af350e.pdf [preview r af350e] |
Size: | 503 kB |
Extension: | |
Mfg: | ricoh |
Model: | r af350e 🔎 |
Original: | r af350e 🔎 |
Descr: | ricoh Copiers Aficio350_450 r_af350e.pdf |
Group: | Electronics > Office equipment > Copiers |
Uploaded: | 17-03-2022 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name r_af350e.pdf !"#$% Technical Bulletin PAGE: 1/1 Model: Adonis-C1 (Scanner Option) Date: 05-Apr-00 No.: RA283001 Subject: Service Manual Correction Prepared by: K. Takagi From: Technical Services Dept., GTS Division Classification: Troubleshooting Part information Action required Mechanical Electrical Service manual revision Paper path Transmit/receive Retrofit information Other ( ) Please add the following SP mode in your Adonis-C1 Scanner Kit service manual, on page 4-2. SP mode No. 017 has been added so that the scanning margin can be adjusted. This was made available with the release of scanner controller firmware version 4.0.0. No Function Settings 017 Trimming Adjusts the scanning margins for both the main and 0~5 sub scan directions. 1 mm / step The larger the value, the wider the margin. 0 !"#$% Technical Bulletin PAGE: 1/1 Model: Adonis-C1 Date: 26-Apr-00 No.: RA283002 Subject: ROM History (Adonis-C Fax Option) Prepared by: M. Mano From: Technical Services Dept., GTS Division Classification: Troubleshooting Part information Action required Mechanical Electrical Service manual revision Paper path Transmit/receive Retrofit information Other ( ) Firmware history for the Adonis-C Fax Option File No. A2855581 (A285Uxxx) Version C.SUM Production A 001 16.01 91C6 1st Mass Prod. B 002 18.00 ED65 April Prod. `00 Symptoms Corrected USA When sending an original wider than the maximum paper width of the B receiving machine (Auto-Reduction OFF / JBIG compression), the machine cuts the image to the smaller size but sends the left-most area of the image instead of the central area. Even though the following bit switch settings should disable the File B Retention function, the machine retains files for 24 hours: User Parameter switch 24 (swusr_18): (bit1, bit0) = (1, 0) When bit 4 of Communication switch 07 is 1 (Fallback from G4 to G3 B whe |
Date | User | Rating | Comment |